NEC 50XR4 User Manual

Also see for 50XR4: Supplementary guide Supplementary guide Brochure Specifications Operation manual

NEC 50XR4 User Manual Manual pdf 34 page image

26Function Settings MenuSetting the power management for computerimagesThis energy-saving (power management) functionautomatically reduces the monitor’s power consumptionif no operation is performed for a certain amount of time.Example: Turning the power management function onOn “POWER MGT.” of “FUNCTION” menu, select “ON”.SEL. ADJ. EXIT RETURNFUNCTIONPOWER MGT.INPUT SKIPSUB. P DETECTZOOM NAVPICTURE FREEZEPDP SAVERCLOSED CAPTIONCAPTION CONT: ON: OFF: AUTO: BTM LEFT: S BY S1: MANUAL: OFF: LOWInformation Power management function* The power management function automatically reducesthe monitor’s power consumption if the computer’skeyboard or mouse is not operated for a certain amountof time. This function can be used when using themonitor with a computer.* If the computer’s power is not turned on or if thecomputer and selector tuner are not properly connected,the system is set to the off state.* For instructions on using the computer’s powermanagement function, refer to the computer’s operatinginstructions. Power management settingsON: In this mode the power management function isturned on.OFF: In this mode the power management function isturned off. Power management function and POWER/STANDBY indicatorThe POWER/STANDBY indicator indicates the statusof the power management function. See below forindicator status and description.POWER/STANDBY indicatorPowermanagementmodeOnOffTurning the pictureback onPicture already on.Operate the keyboard ormouse. The picturereappears.POWER/STANDBYindicatorGreenRedPowermanagementoperating statusNot activated.Activated.DescriptionHorizontal and verticalsynchronizing signalsare present from thecomputer.Horizontal and/orvertical synchronizingsignals are not sentfrom the computer.Setting the Input SkipWhen this is ON, signals which are not present will beskipped over and only pictures whose signals are beingtransmitted will be displayed.This setting is valid only for the INPUT SELECT buttonon the unit.Example: Set to “ON”On “INPUT SKIP” of “FUNCTION” menu, select “ON”.SEL. ADJ. EXIT RETURNFUNCTIONPOWER MGT.INPUT SKIPSUB. P DETECTZOOM NAVPICTURE FREEZEPDP SAVERCLOSED CAPTIONCAPTION CONT: OFF: ON: AUTO: BTM LEFT: S BY S1: MANUAL: OFF: LOWInformation INPUT SKIP settingsOFF: Regardless of the presence of the signal, scanand display all signals.ON: If no input signal is present, skip that signal.* “SETTING NOW” will appear during the input search.Erasing the sub screen image when there isno input signalThis function automatically erases the black frame of thesub screen when there is no sub screen input signal.This feature is available only when the picuture-in-picuturemode is selected.Example: Set to “OFF”On “SUB. P DETECT” of “FUNCTION” menu, select“OFF”.SEL. ADJ. EXIT RETURNFUNCTIONPOWER MGT.INPUT SKIPSUB. P DETECTZOOM NAVPICTURE FREEZEPDP SAVERCLOSED CAPTIONCAPTION CONT: OFF: OFF: OFF: BTM LEFT: S BY S1: MANUAL: OFF: LOWInformation SUB. P DETECT Function* The sub screen disappears when the input signal is lost.* Loss of the input signal means a condition in which thevideo signal and the sync signal are not present.* Under conditions in which the sub screen hasdisappeared, the ZOOM NAV and PICTURE FREEZEfunctions will not work. The WIDE button will notfunction either. SUB. P DETECT settingsAUTO: The black frame disappears 3 seconds after theinput signal is lost.OFF: Turns off the SUB. P DETECT function.