NEC ACCUSYNC LCD93VX User Manual

Also see for AccuSync LCD73 VXM: Specifications Specifications

NEC ACCUSYNC LCD93VX User Manual Manual pdf 5 page image

3To attach the Base to the LCD Stand:1. Insert the front of the LCD Stand into the holes in the front of the Base (Figure 1).2. Attach the Base to the Stand. The locking tab on the Base should fit into the hole on theback of the Stand.To attach the LCD monitor to your system, follow these instructions:1. Turn off the power to your computer.2. For the PC or Mac with DVI digital output: Connect the DVI signal cable (not included)to the connection of the display card in your system (Figure A.1). Tighten all screws.For the PC with Analog output: Connect the 15-pin mini D-SUB signal cable to theconnector of the display card in your system (Figure A.2). Tighten all screws.For the MAC: Connect the Macintosh cable adapter to the computer, then attach the15-pin mini D-SUB signal cable to the Macintosh cable adapter (Figure A.3). Tighten allscrews.NOTE: To obtain the Macintosh cable adapter, call NEC Display Solutionsof America, Inc. at (800) 632-4662.Quick StartFigure 1Front BaseStandLocking TabFigure A.1Figure A.2Figure A.3DVI Signal Cable(not included)Macintosh CableAdapter(not included)Note: Some Macintoshsystems do not require aMacintosh Cable Adapter