NEC AccuSync LCD174WXM User Manual

Also see for AccuSync LCD174WXM: Specifications Specification sheet

9OSD Warning: OSD Warning menus disappear with SELECT button.NO SIGNAL: This function gives a warning when there is no signal present.After power is turned on or when there is a change of input signal or videois inactive, the No Signal window will appear.OUT OF RANGE: This function gives a recommendation of the optimizedresolution and refresh rate. After the power is turned on or there is a changeof input signal or the video signal doesn’t have proper timing, the Out OfRange menu will appear.EXITSelecting EXIT allows you exit OSD menu/sub menu.LANGUAGEOSD control menus are available in seven languages.OSD TURN OFFThe OSD control menu will stay on as long as it is in use. In theOSD Turn OFF submenu, you can select how long the monitor waitsafter the last touch of a button to shut off the OSD control menu. Thepreset choices are 10 - 120 seconds in 5 second intervals.OSD LOCK OUTThis control completely locks out access to all OSD control functionswithout Brightness, Contrast and Volume. When attempting toactivate OSD controls while in the Lock Out mode, a screen willappear indicating the OSD are locked out. To activate the OSD LockOut function, press “1<->2 / RESET“, then “+“ key and hold downsimultaneously. To deactivate the OSD Lock Out, press “1<->2 /RESET“, then “+“ key and hold down simultaneously.EXPANSIONSelects the zoom mode.FULL: The image is expanded to 1440 x 900 (LCD174WXM/LCD194WXM), or 1680 x 1050 (LCD224WXM) regardless ofresolution.ASPECT: The image is expanded without changing the aspect ratio.DDC/CITurns on or off the two-way communication and control of the monitor.With DDC/CI turned on, some monitor settings can be adjusted through thegraphics card using a computer.MONITOR INFOIndicates the model and serial numbers of your monitor.Controls - continued