©2018 NEC Display Solutions, Ltd. Page 50 of 718.15 Control menu CEC CECAvailable options: On / OffEnables and disables the CEC (Consumer Electronics Control) function between the display and theCompute Module, in order to control CEC enabled software via the display’s IR Remote Control.5See section 0 for more details on using this function.8.16 Control menu CEC Search DeviceAvailable options: Yes / NoSelecting Yes will start the process of the display searching for a CEC (Consumer Electronics Control)device on the connection to the Compute Module. If no device is found, confirm that CEC enabledsoftware is currently running on the Compute Module and that any CEC device drivers are enabled.5Once the device has been detected, the display’s IR Remote Control can be used to navigate and controlCEC enabled software.5 These models require display firmware version R1.006E or later for this feature: P404, P484, P554, V404, V484,V554, V404-T, V484-T, V554-T
