NEC DLP Cinema NP-02HD User Manual
Also see for NP-02HD: User manualUser manualInstallation manual
                                                                                | |
Contents
| 
403. Projection of Images (Basic Operation)3-7. Turning your projector off1 Press the POWER button on the projector control panel for three seconds or longer.The light is turned off, the POWER button indicator blinks green, and the STATUS indicator blinks orange (cooling state).The fan will continue to rotate while cooling, and the amount of time remaining for cooling is displayed on the LCD screen.The cooling-off time is 90 seconds.When the cooling is finished, the POWER button indicator turns off and the status indicator lights orange (standby state).KEY LOCK becomes automatically on if no control panel operation takes place in the standby state for 30 seconds bydefault. Buttons on the control panel do not function while KEY LOCK is on. (See page 38)2 After the standby mode is set, turn off the projector's power switches in this order: first the pro-jector power switch, then the light power switch.ONOFFONOFFLight power switch Projector power switch3 Turn the administrator key counterclockwise to the horizontal position, then remove it.Administrator keyAdministrator switch |
Related manuals for NEC NP-02HD
manualsdatabase
Your AI-powered manual search engine