NEC DS1000 Operation Manual

Also see for DS2000 IntraMail: User guide Feature handbook User guide Feature handbook Feature handbook

Contents

NEC DS1000 Operation Manual Manual pdf 28 page image

Analog Door Box4-4 ◆ Section 4: Optional Equipment DS1000 Hardware ManualProgramming the Door BoxDoor Box SetupYou must assign the chime pattern to each installed Door Box.● In 1801 - Door Chime, enter the Door Chime type.0 = Normal Ring Group ringing.1 = Low pitch chime pattern.2 = Mid range pitch chime pattern.3 = High pitch chime pattern.If you enter Door Chime type 0 (normal ring) above, you can set up Call Coverage keys for theRing Group. This allows extensions that are not members of the Ring Group to answer Door Boxcalls. Extensions with Call Coverage keys to the Door Box Ring Group can also activate the relay(see Door Box Relay Control below).Door Box RingingWhen a visitor at the door presses the Door Box call button, the Door Box will alert (chime) all the exten-sions in the Ring Group to which the Door Box belongs. For example, if the Door Box and extensions 301and 302 are in Ring Group 1, pressing the call button alerts 301 and 302.● In 1802 - Ring Group Number, assign the Door Box and the extensions that should alert to the sameRing Group (1-8).● Ring Groups 1-8 are preset to use master numbers 600-607.Door Box Relay ControlYou normally set up Door Box 1 to control the Door 1 relays, and Door Box 2 to control the Door 2 relays(see 1801 - Relay Owner below).● In 0201 - Door 1 Relay, to assign the Door 1 Relay for door strike control, enter 1.● In 0201 - Door 2 Relay, to assign the Door 2 Relay for door strike control, enter 1.● In 1801 - Relay Owner, for the Door Box extension (324 or 325):- Enter 1 to have the Door Box control Door 1 relays.- Enter 2 to have the Door Box control Door 2 relays.Figure 4-2: Connecting an Analog Door BoxBLK BLUE GRNYELTo DOOR1 inDS1000 cabinetWHT RED80200 - 30NCNCDoor Box 1Door Box 1RelayDoor Box 1TDoor Box 1RRelay 1TRelay 1R