NEC DS1000 User Manual

Also see for DS2000 IntraMail: User guide Feature handbook Feature handbook Feature handbook Feature handbook

NEC DS1000 User Manual Manual pdf 39 page image

Feature OperationDS1000/2000 Cordless Telephone User Guide Chapter 2: Features ◆ 352Tandem TrunkingTandem Trunking is disabled by default.To set up a tandem call (Unsupervised Conference):1. Place or answer an outside call.2. Press CONF.3. Place or answer another outside call.4. Press CONF + TALK to hang up.- You can optionally press HOLD to place the Conference on Hold. Press one of the line keys +CONF to reinstate the tandem call.To disconnect a tandem call (using Forced Trunk Disconnect):1. Press line key for busy line (or use Direct Line Access) + # to disconnect the line.To Barge In on a tandem call:- Use this procedure to rejoin a Conference already in progress.1. Press line key for busy line (or use Direct Line Access) + 4 to Barge In.TransferTransfer is enabled by default.To Transfer your call:1. Do not hang up.2. Press TRANSFER.3. Dial your co-worker’s extension number.- You can also Transfer the call to a Ring Group or UCD Group master number.4. Announce the call + Press TALK to make a Screened Transfer.ORPress the flashing line key to return to the call if your co-worker doesn’t want it.ORPress TALK to send the call through unscreened.To Transfer your call to a co-worker’s mailbox:1. Do not hang up.2. Press TRANSFER + Dial your co-worker’s extension.3. Dial 8.- To Transfer the call to your own mailbox, press your own Message Center key.4. Press TALK to hang up.