NEC DSX CORDLESS LITE II Manual

Also see for DSX CORDLESS LITE II: Manual Hardware manual

NEC DSX CORDLESS LITE II Manual Manual pdf 38 page image

Feature Operation34 ◆ Chapter 2: Features DSX Cordless Lite II Telephone User GuideSplitSplit is disabled by default.You must have a Split key programmed to use this feature. Refer to the Programmable Function Keys featurefor more.To Split between your current Intercom call and a new Intercom call:1. Press HOLD to place your current Intercom call on Hold.2. Place the second Intercom call.3. Press the Split key to switch between your two Intercom calls.To Split between your current outside call and an Intercom call:1. Press TRANSFER to place the outside call on Hold.2. Place or answer waiting Intercom call.3. Press the Split key to switch between the Intercom call and the outside call.To Split between your current Intercom call and an outside call:1. Press HOLD to put your Intercom call on Hold.2. Press a line key to place or answer your outside call.3. Press your Split Feature Key to switch between the calls.Tandem CallsTandem Calls are disabled by default.To set up a tandem call (Unsupervised Conference):1. Place or answer an outside call.2. Press CONF.3. Place or answer another outside call.4. Press CONF + TALK to hang up.- You can optionally press HOLD to place the Conference on Hold. Press one of the line keys +CONF to reinstate the tandem call.To disconnect a tandem call (using Forced Line Disconnect):1. Press line key for busy line (or use Direct Line Access) + # to disconnect the line.To Barge In on a tandem call:- Use this procedure to rejoin a Conference already in progress.1. Press line key for busy line (or use Direct Line Access) + 4 to Barge In.