E-26● Basic connectionsNOTE• The personal computer has input terminals for both image and sound for “1” and “2”. Hook up the sound andimage to the corresponding terminals. If they are not hooked up to the corresponding terminals, the image andsound will not be output correctly.• See page E-11 for information about the input and output terminals.● Connecting to IBM NOTE and CompatibleNOTEAfter you have connected the supplied cable, check the external CRT output/internal LCD output states and set themode in the software running on the PC.The connection with the PC will not be made if you do not set the external CRT output mode.Terminal panel on the backof the DT20 main unitTo speakerinputterminalsFix the connector cable usingthe screw-in fasteners.To audio outputterminal on PCTo RGB outputconnector on PC To analog RGBconnector on monitorThe connector cablemodel No. differsaccording to the typeof PC.Signal cable (supplied)To RGB-IN1or RGB-IN2terminalDT20