213. BASIC OPERATIONLogin (DT700 Series Only)When login mode is activated, following procedure isrequired.
Enter login code and press Set Soft key.(The station number is used as the Login code.)
Enter the password and press OK Soft key.
If the login code is accepted, display changes tonormal idle status.4:26 PM TUE 13 APR 2008MIC DND >>>Logout (DT700 Series Only)
Press the pre-assigned Logout Feature Key on theterminal.Note: This location is an example.Note: Logout button is assigned by data setting atthe ECP (Enterprise Communication Platform).4:26 PM TUE 13 APR 2008MIC DND >>>
“LOGOUT?” is displayed on the LCD of the terminal.4:26 PM TUE 13 APR 2008L-OUT >>>
Press the Logout Feature Key on the terminalagain.