NEC DT730G (CG): ITL-12CG-3 User Manual

Also see for Univerge SV8100: User guide User guide User guide User guide Quick reference guide

NEC DT730G (CG): ITL-12CG-3 User Manual Manual pdf 101 page image

931.Speed Dialing – Station/Group• To SetSTEP 1: Press . Receive Dial Tone.lamp lights red.STEP 2: Dial the system or group storage code.STEP 3: Dial the desired speed dial bin. In thisexample, “001” is dialed as the desiredspeed dial bin.STEP 4: Dial the destination telephone number.STEP 5: Press Hold.STEP 6: Enter a name associated with the SpeedDial Number.STEP 7: Press Hold again.STEP 8: Press the key to hang up.• To Make a CallSTEP 1: Press (Redial) .STEP 2: Press the desired speed calling number.STEP 3: Lift the handset. lamp goes off.Last Number Redial• To Redial Last Number DialedSTEP 1: Press (Redial). The last number dialed isdisplayed.STEP 2: Press the Volume (Up) or (Down) keyuntil a desired number is displayed. Up to 4previously dialed numbers are available.TIPOne-Touch Speed Calling key for feature access:One-Touch Speed Calling key may be used as afeature key by storing the feature access code. Thefeatures may be programmed on a system basis by theTelephony Server Administrator.Access codes may be stored in conjunction withtelephone numbers. For example, one button can beprogrammed by the user to transfer to a certainextension.TIP For the assignment of Speed Calling - Station/GroupAccess Code, contact the PBX maintenance personnel.Speaker SpeakerSet SysSYS 00012145551212SYS 0001SpeakerSpeakerXXXXXX–1Number tobe RedialedMIC PICK FDA >>>LNR[ * ]/SPD[_ _]