NEC DTH-4R-2 - CORDLESS Lite II BLAC Owner's Manual

Contents

NEC DTH-4R-2 - CORDLESS Lite II BLAC Owner's Manual Manual pdf 40 page image

Document Revision 3 NEC Unified Solutions, Inc.4 - 4 D term Cordless II HandsetSECTION 2 SETTING U P AND PROGRAMMING THE DTR-4R-1Programming Mode1. Press and hold down and #, then press the TALK key. The F1 LEDflashes red.2. Press the R/VOL key repeatedly to scroll through the line key (LK) andfeature options for function key F1.3. Press the MUTE key to select the displayed line key or feature.4. Press the R/VOL key to toggle between ‘TALK’ for On or ‘NO TALK’ for Off. ‘TALK’ is selected when the F1~F4 function keys are programmed forCO or Call Appearance Keys. ‘NO TALK’ is selected when F1~F4function keys are programmed for functions not requiring an off-hookstate (e.g., Log On/Off or DND).5. Press the MUTE key to advance to the next function key (F2 ~ F4).6. After programming F4, press the MUTE key to advance to global off-hookringing assignment.7. Press R/VOL to turn global off-hook ringing on or off (LCD indicates ON orOFF as appropriate).8. Press the TALK key to exit. Function keys (F1 ~ F4) can be programmed as line keys 1~16 forredial (LNR/SPD), answer (ANS), feature (FNC), or recall. Whenassigned, these keys operate the same as on an NEC multilinetelephone. When initially installed, function keys (F1~F4) default to line keys 1~4respectively and off-hook ringing defaults to ON. Global off-hook ringing must be set to ON (default) if any function keyis to operate with off-hook ringing.