NEC DV11G User Manual
                      | |
Contents
| 
E-9Control PanelLIGHTWHITE BALANCEAUTOPOSI / NEGABLUE REDCOLOR / BW TEXT / PHOTOMEMORYDOWNUPCAMERA MEMORY EXTERNALSOURCECAPTUREAUTOBRIGHTNESSDARK BRIGHTFOCUSAUTO NEAR FARON / OFFKEYSTONEREAL / FREEZEZOOMWIDE TELENOTE:• The main light is provided within the camera head. Turn it on when shooting printed matter. The base light is providedwithin the stage, which is to be turned on when shooting see-through material. For the combination of ON and OFF ofthe lights, please refer to the “lighting guidelines” in the NOTE on page E-15.WHITE BALANCEAdjusts the tone of white.‘AUTO’Adjusts the tone of white automatically. Before pushing the button,project a white sheet of paper fully on the screen and adjust the bright-ness. The indicator lights up during the adjustment.• Adjust WHITE BALANCE again when the ambient illumination haschanged.‘BLUE’Adds a slightly blue shade to white.‘RED’Adds a slightly yellow shade to white.(NOTE) With power to this equipment turned off, white balance willbe reset to factory setting. See page E-15 for storage of adjustedvalue.‘LIGHT’Turns on the light. At each press,the illumination changes as fol-lows:“Main light lights up and base lightgoes out.” → “Main light goes outand base light lights up.”→ “Bothmain light and base light go out.”SOURCESelects a source input for output.The indicator for the currently selected inputlights up.‘CAMERA’Selects camera image.‘MEMORY’Selects the image stored in image memory.(NOTE) Digital zoom is cancelled.‘EXTERNAL’Selects the image being inputted to the RGBinput terminal.(NOTE) EXTERNAL cannot be selected whenvideo output is selected by dip switch 4. (Seepage E-10)BRIGHTNESSAdjusts the brightness of image.‘AUTO’Adjusts the brightness of image au-tomatically. The indicator lights upduring the adjustment.‘DARK’Darkens the image.‘BRIGHT’Brightens the image.‘REAL / FREEZE’Selects betweenmoving imagemode and still im-age mode. The in-dicator for themoving imagemode selectedlight up.‘POSI / NEGA’Produces an output afternegative conversion.Press this button again and theoutput will return to positive.The indicator lights up whenpositive is on.‘COLOR / BW’Produces black-and-white output. Pressagain and the output will return to color.The indicator lights up when color is on.‘TEXT / PHOTO’Selects output for text or photo.The indicator lights up when text is on.(NOTE)When the negative mode is selectedusing the ‘POSI/NEGA’ button, the ‘TEXT/PHOTO’ button is not available.‘CAPTURE’Writes image into imagememory.(NOTE) Turning power offwill erase memory con-tents.Image Memory No. DisplayDisplays the No. of the imagememory selected.MEMORYSelects image memory.‘UP’Selects the next image memory.‘DOWN’Selects the previous image memory.ZOOMChanges the range of image to beshot.‘WIDE’Shoots a wider range.‘TELE’Shoots an enlarged portion of anarea.(NOTE) For zooming above opti-cal 15-power zoom, use digitalzoom. In digital zoom, changemagnification by pressing buttonstep by step. Digital zoom maysometimes produce inferior imagequality.FOCUSAdjusts the focus of camera image.‘AUTO’Adjusts the focus of camera image automatically.The indicator lights up during the adjustment.‘NEAR’Moves the focus nearer to the camera.‘FAR’Moves the focus farther from the camera.KEYSTONECorrects trapezoidal dis-tortion when shot ob-liquely. Or cancels correc-tion. (See page E-16)‘ON / OFF’Turns trapezoidal correc-tion on or off. The indica-tor lights up with trapezoi-dal correction on.‘+’ ‘-’Makes fine adjustment oftrapezoidal correction. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine