NEC Dterm Cordless Lite II Owner's Manual

Contents

D term Cordless Lite II Owner’s Guide 4 - 7NEC Unified Solutions, Inc. Document Revision 2To restore the REDIAL key to the redial function:1. Enter setup mode (refer to steps 1~5 Switching from Desk to Cordless Usinga Softkey on page 4-6).2. Press the F3 key and then the HOLD key. Digital (Redial) is displayed in theLCD indicating that the redial function has been restored to the REDIAL key.3. Press the TALK key once to restore the handset to standby mode.SECTION 3 U SING THE H ANDSETWhen using the handset, different status indications are displayed in thehandset LCD.Acquiring LinkWhen the TALK key on the handset is pressed, thehandset attempts to connect to the base unit. TheACQUIRING LINK message blinks on the handsetdisplay (300 msec ON/300 msec OFF) to indicatethat connection is in progress.After the connection is made between the handsetand base unit, a message is displayed in the LCD to indicate the condition ofthe handset. Refer to Table 4-2 LCD Display Indicators for a list of possibleconditions.Table 4-2 LCD Display IndicatorsCondition Indicator LCD DisplayLine OK TALK Icon N/ANo Connection to Base Unit Error Tone NO SERVICEChannel Busy Error Tone SYSTEM BUSYLine in Use Error Tone LINE IN USENo Line Selected TALK Icon NO LINE SELECTEDACQUIRING LINK