NEC Dterm Headset Cordless User Manual

Also see for Dterm I Series: User guide User guide User guide Owner's manual Quick reference guide

Contents

NEC Dterm Headset Cordless User Manual Manual pdf 11 page image

8Volume SetupSetting the ringer volume on the Dterm Headset Cordless telephone is done manually by followingthese steps:1. When the telephone is in the standby mode, press MENU/MUTE. Thedisplay then shows the telephone menu in standby mode.2. Press UP or DOWN to move the pointer to Ringer Volume,then press SELECT/CH.3. Press UP or DOWN to move the pointer through the ringersettings (Ringer Off, Ringer Low, or Ringer High). You will hear aringer or melody at the selected volume (or does not ring when youselect Ringer Off).4. Press SELECT/CH, and you will hear a confirmation tone.5. Press END to exit. If you select Ringer Off, appears on the display whenyou make or receive calls, or when charging the handset.Adjusting the Earpiece VolumeThe handset earpiece volume setting can only be adjusted during a telephone call. The availablevolume options are:• Volume Low• Volume Medium• Volume High• Volume MaximumPress UP or DOWN to select the volume setting. When you hang up, the telephone keeps thelast volume setting selected. When you press UP in the maximum volume level or DOWN in lowest volume level, an errortone sounds.Ringer OffRinger Low Ringer High Ringer VolumeRinger TonesDistinct. Ring