33♦ Key in the access code to establish call forwardingwhen call is not answered.Example: *4=Call Forward Don’t Answer, SET.♦ Press the FNC key to enter.♦ Press the FNC key to confirm.♦ Setting tone will ring.♦ After two seconds, return to the standby state.To Set the Call Forwarding Don’t Answer Can-cel Access Code:♦ Press the FNC key →3→5→2. PSIII displays:♦ Press the FNC key or 2. For Mode 2* systems,PSIII displays:♦ Key in the access code to cancel Call ForwardingDon’t Answer.Example: #4=Call Forward Don’t Answer Cancel.♦ Press the FNC key to enter.♦ Press the FNC key to confirm.♦ Setting tone will ring.♦ After two seconds, return to the standby state.[Call Forwarding All Calls]To set the access code to establish Call ForwardingAll Calls.NOTE: Confirm your system administrator thelist of access codes.To Set the Call Forwarding All Calls AccessCode:♦ Press the FNC key →3→5→3. PSIII displays:♦ Press the FNC key or 1. For Mode 2* systems,PSIII displays:* Mode 2 features are only available on NEAX 2000 IVS Series 1900 softwareor NEAX 2400 IMX Series 7300 software & Zone Transceiver Version 5.00software or later.[1]Set[2]ResetCFW D/AAccess No?[1]Set[2]ResetCFW ALL