NEC E463 User Manual

Also see for E323: Specifications Brochure Dimensional drawing

Contents

NEC E463 User Manual Manual pdf 19 page image

English-17EnglishRS-232C Port SpecificationsPC control of the DisplayAttach an RS-232C cable cross-type (commercially available) to the supplied Din/D-SubRS-232C for the connections�Note: This operation system should be used by a person who is accustomed to usingcomputers�Communication conditionsSet the RS-232C communication settings on the PC to match the display'scommunication conditions�The display's communication settings are as follows:Baud rate: 9,600 bpsData length: 8 bitsParity bit: NoneStop bit: 1 bitCommunication procedureSend the control commands from the PC via the RS- 232C connector�The display operates according to the received command and sends a responsemessage to the PC�Do not send multiple commands at the same time� Wait until the PC receives theresponse before sending the next command�Power Mode StatusMode LED StatusOn NoneStandby RedWarmingup Blinking RedPower saving support automatically power on when signal appear�Standby to power on by touch up remote or keypad power button�