English-17EnglishInstallation for Wall Mouting (Optional)For customer:CAUTION:DO NOT mount the monitor yourself. For proper installation it is stronglyrecommended to use a trained, qualified technician.Please contact yoursupplier as they may be able to provide a list of qualified installationprofessionals. Mounting on a wall or ceiling and hiring a technician is thecustomer’s responsibility.Maintenance• Periodically check for loose screws, gaps, distortions, or other problemsthat may occur with the mounting equipment. If a problem is detected,please refer to qualified personnel for service.• Regularly check the mounting location for signs of damage or weaknessthat may occur over time.DO NOT block ventilated openings with mounting accessories or otheraccessories.For NEC Qualified Personnel:Stability Hazard.The device may fall, causing serious personal injury or death. To preventinjury, this device must be securely attached to the floor/wall in accordancewith the installation instructions.Carefully inspect the location where the unit is to be mounted. Not allwalls or ceilings are capable of supporting the weight of the unit. Weightof this monitor is mentioned in Specification (Please refer to the page ofSpecification). Product warranty does not cover damage caused by improperinstallation, re-modeling, or natural disasters. Failure to comply with theserecommendations could result in voiding the warranty.To ensure safe installation, use two or more brackets to mount the unit. Mountthe unit to at least two points on the installation location.We suggest that you keep your display at least 2.36 inches (60 mm) from thewall to prevent cable interference. Before mounting your display on the wall,you need to remove the stand base. For your safety, only mount with a ULlisted wall mount bracket that supports the weight of the display. (Please referto the page of Specification.) To attach a wall mount bracket to your display: