NEC EA243WM-BK User Manual

Also see for EA243WM-BK: Specifications

English-13EnglishSCREEN (Analog input only)AUTO ADJUSTAutomatically adjusts the image position, H. Size and Fine settings.AUTO CONTRASTAdjusts the image displayed for non-standard video inputs.LEFT / RIGHTControls horizontal image position within the display area of the LCD.DOWN / UPControls vertical image position within the display area of the LCD.H.SIZEAdjusts the horizontal size by increasing or decreasing this setting.If the “AUTO Adjust” function does not give you a satisfactory picture setting, a further tuning can be performed byusing the “H.Size” function (dot clock). For this a Moiré test pattern could be used. This function may alter the widthof the picture. Use LEFT/RIGHT key to center the image on the screen. If the H.Size is wrongly calibrated, the resultwould look like the left drawing. The image should be homogeneous.When H.SIZE value iswrong.When H.SIZE value isimproved.When H.SIZE value iscorrect.FINEImproves focus, clarity and image stability by increasing or decreasing this setting.If the “Auto Adjust” function and the “H.Size” function do not give you a satisfactory picture setting, a fi ne tuning can beperformed by using the “Fine” function.For this a Moiré test pattern could be used. If the Fine value is wrongly calibrated, the result would look like the leftdrawing. The image should be homogeneous.When FINE value iswrong.When FINE value iscorrect.INPUT RESOLUTIONSelects one of the following pair of resolutions as the input signal priority:1360 x 768 or 1280 x 768 or 1024 x 768 (vertical resolution 768),1600 x 900 or 1280 x 960 (horizontal frequency 60kHz, vertical frequency 60Hz),1680 x 1050 or 1400 x 1050 (vertical resolution 1050).ColorColor Control System: Six color presets select the desired color setting (sRGB and NATIVE color presets arestandard and cannot be changed).1, 2, 3, 5: Increases or decreases Red, Green or Blue color depending upon which is selected. The change in color willappear on screen and the direction (increase or decrease) will be shown by the bars.NATIVE: Original color presented by the LCD panel that is unadjustable.sRGB: sRGB mode dramatically improves the color fi delity in the desktop environment by a single standard RGB colorspace. With this color-supported environment, the operator could easily and confi dently communicate color withoutfurther color management overhead in most common situations.NOTE: When MOVIE, GAMING, or PHOTO is selected as the DV MODE, NATIVE is selected automatically as the sixcolor preset and cannot be changed.