- 76 -Appendix B Report MonitoringTo use Alert notification feature after installing NEC ESMPRO Manager, the following settingsare required. (This feature can be used only in the Windows environment.)1. Untar the WebPAM PRO installation module.Ex.) As the WebPAM PRO installation module is “WPPInst-1.00.tar.gz”:# tar -zxvf WPPInst-1.00.tar.gz2. Start "nec\Linux\WebPAMPR\WPMALERT\WPPMANEN.EXE" in the Windowsenvironment.3. Click [Yes].NOTE: If you click [No], the operation terminateswithout setting.4. Click [OK].5. Reboot the system.