NEC Electra Elite 48/192 Features And Specifications Manual

Contents

NEC Electra Elite 48/192 Features And Specifications Manual Manual pdf 66 page image

Features and Specifications Manual A - 45Automated Attendant A-16FEATUREDESCRIPTIONThe Automated Attendant answers incoming CO/PBX calls and sends agreeting message to calling parties. When the caller enters a station numberor a 1- or 2-digit number from the dial pad, as instructed in the greetingmessage, the Automated Attendant transfers the call to a designated stationor Station Hunt group. The Automated Attendant can be set to provide eightautomated message levels.Incoming DID calls can be answered by the Automated Attendant (SystemSoftware S5000 or higher is required).SYSTEMAVAILABILITYTerminal Type:Not applicableRequired Components:VRS(4)-U10 ETUOPERATINGPROCEDURES1. Go off-hook.2. Dial the VRS Voice Message Record/Verify/Erase Access Code(e.g., EK).3. Dial operation:A RecordingB ConfirmationC Erasing4. Dial operation:A Automated AttendantB Voice Prompt MessageC Delay Announcement5. Enter Automated Attendant Message (A~H).To record an Automated Attendant Message: