NEC Electra Elite IPK Installation And Maintenance Manual

Also see for ElectraElite IPK: User manual User guide User guide User guide Attendant user guide

Contents

NEC Electra Elite IPK Installation And Maintenance Manual Manual pdf 22 page image

SPE Hardware, Installation, and Maintenance Manual 2 - 1______________________________________________________________________________________________________________________________________________________________________Chapter 2 Programming the KSU for SPE(M)-U( )SECTION 1 INSTALLING THE SPE(M)-U( ) ETU1.1 Programming RequirementsThe SPE(M)-U( ) ETU is programmed as a MIF(M)-U( ) ETU. There is not anSPE card-type in system programming.Use the following memory blocks to program the system for the SPE(M)-U( )ETU. Not all memory blocks will apply; use the ones necessary to configurethe application. MB 7-1 Card Interface Slot Assignment to assign the appropriate slot fora MIF(M)-U( ) ETU. MB 7-3-01 MIF (LCR) Assignment to assign the LCR functions to theMIF(M)-U( ) ETU if using the LCR function. MB 7-3-04 MIF (Caller ID) Assignment to assign the class functions tothe MIF(M)-U( ) ETU is using the Caller ID Scrolling feature. MB 1-8-35 COM Port Baud Rate Setting Assignment to assign theappropriate baud rate for COM 1 and COM 2 for PC Programming andSMDR if needed. MB 1-8-36 COM Port Parity/Stop Bit Setting Assignment to assign theappropriate parity and stop bit for COM 1 and COM 2. MB 1-8-38 Modem Number for Remote Programming Assignment,assign the modem extension number for the built in modem when usingthe internal modem of the SPE(M)-U( ) ETU. MB 1-8-18 Site Name Assignment, assign a site name for PCprogramming access if needed. MB 1-8-17 PC Programming Password Assignment, assign a passwordfor PC programming access if needed.