System Configuration 4-21System HardwareMove the cursor onto "System Hardware" to display the System Hardware menu.To make a selection for "Thermal Sensor", "Wake On Event", and "Console Redirection", firstselect a desired option and press Enter to display its submenu.See the table below for setup options on the screen.Option Parameter Description Your SettingAC LINK Stay Off[Last State]Power OnSpecify the AC LINK feature by selecting thestatus of the power supply unit of the serverwhen the AC power supply restarts. (See thetable on the next page for details.) Do notselect the parameters other than "Stay Off"when "Enabled" is selected for "Wake OnLan."Waiting timefor AC-LINK[0], 10~3600 Set maximum waiting time in second forAC-LINK. If either of ACs is not supplied intime, the system will be turned on as simplexconfig. Value 0 means the system waitseternally.Range [0 or 10-3600sec.]Error LogInitializationEnter Press Enter to initialize the error log. Themessage "Error Log Cleared" appears uponsuccessful completion. If failed, the message"Error Log Not Cleared!" appears.[ ]: Factory-setIMPORTANT: It is recommended that “Waiting time for AC-LINK” be 3600 when you useUPSs in the redundant configuration.
