NEC Express 5800 User Manual

Also see for Express 5800: Service guide User guide User guide User guide User guide

Contents

NEC Express 5800 User Manual Manual pdf 151 page image

Troubleshooting 6-25TroubleshoTh ou should do when a trouble occurs in the product.Probleotingis section describes what yms with NEC EXPRESSBUILDERWhen t D-ROM, check the following: and restart the server?ce order may be specified with the BIOS setup utility of the server. Use thetility to change the boot device order to boot the system from the CD-ROMWhen he following message appears.After thi o theerror codhe server is not booted from the NEC EXPRESSBUILDER CDid you set the NEC EXPRESSBUILDER CD-ROM during POST→ If you do not set the NEC EXPRESSBUILDER CD-ROM during POST and restart theserver, an error message will appear or the OS will boot. Is BIOS configuration correct?→ The boot deviBIOS setup udrive first. [Boot]>an error occurs while the NEC EXPRESSBUILDER is in progress, ts message appears, check the error and take the appropriate corrective action according tes listed in the table below.Message Cause and RemedyTh s machine is not supported. This NEC EXPRESSBUILDER version isnot designed for this server. Execute theiNEC EXPRESSBUILDER on the compliantserver.NvRAM access error An access to the nonvolatile memory(NvRAM) is not acceptable.Hard disk access error The hard disk is not connected or it isfailed.Check whether the hard disk is correctlyconnected.An error message will also be displayed when an error was detected during system diagnosis. Take a noteor print the error message displayed, and contact your sales agent.