NEC Express5800 1080Xd Installation Procedures Manual

Also see for NEC Express5800 Series: User guide User guide User guide User guide Configuration guide

Contents

NEC Express5800 1080Xd Installation Procedures Manual Manual pdf 8 page image

4 Express5800/1080Xd Installation Procedures! Clean, dust-free, and well ventilated. Front and rear and top ventilatingopenings kept free of obstructions. Away from sources of heat, vibrationor physical shock.! Isolated from strong electromagnetic fields and electrical noise producedby electrical devices (such as air conditioners, large fans, large electricmotors, radio and TV transmitters, and high-frequency security devices).! Spacious enough to provide at least 2 feet (0.6 meters) behind the server,3 feet (1.0 meters) in front of the server and 19.0 inches (0.5 meters) oneach side of the server for proper cooling, airflow, cable clearance andmaintenance.! Easily accessible for server maintenance and installation of serverupgrades.Unpacking the Server! CAUTIONIf the packaged server has come from an environment whichis significantly warmer or colder than the environment inwhich it is to be installed, leave the server in it’s shippingcontainer for at least 24 hours at room temperature beforeremoving any packaging. This will prevent damagingcondensation from occurring.! WARNINGThe server weighs approximately 440.0 pounds (199.6kg). Ifthe server contains numerous components, it will weighmore. To avoid personal injury, make sure you havesomeone help you unpack and move the server.When you receive the server, check to see if the shipping boxes are damaged,note the damage, and if possible, photograph it for reference. After removing thecontents of the containers, keep the cartons and the packing materials. If thecontents appear damaged when you unpack the boxes, file a damage claim withthe carrier immediately.The server cabinet is covered with a vinyl shroud for anti-dew-condensationprotection. The packaged cabinet is loaded onto the pallet, outer shipping coversare attached, and the covers are fastened with plastic straps. The server isloaded into the shipping container with the front of the server facing the rear ofthe container. A ramp for loading and unloading the cabinet is also included inthe shipping container.