NEC Express5800/320Fd-LR User Manual

Also see for EXP320J: User guide User guide User guide User guide

Contents

NEC Express5800/320Fd-LR User Manual Manual pdf 70 page image

4-6 Windows SetupSize of the Partition to be CreatedFor Windows Server 2003 x64 Editions:The required minimum size of a partition to install the system can be obtained from the followingformula:Size required for installation + paging file size + dump file sizeSize required for installation = 5,900MB (Windows Server 2003 R2)Paging file size (recommended) = size of memory mounted* × 1.5Dump file size = size of memory mounted* + 1MBIMPORTANT: The above paging file size is necessary for collecting debug information (memorydump). The boot volume requires a paging file size that is large enough to store thedump file. Set an adequate paging file size for the entire system, since an inadequateamount of paging file might cause a harvest of incorrect debug information (memorydump). The maximum size of the dump file is “mounted memory size + 1MB,” regardless ofthe mounted memory and the debug information (the types of memory dump). If you need to install other applications, add the capacity of hard disk required for thoseapplications.For example, if memory of 1GB is mounted, the required minimum partition size obtained from theabove formula is as follows:5,900MB + (1,024MB × 1.5) + 512MB + 1MB = 7,949MBFor Windows Server 2003:You can obtain the required minimum size of the partition to install the system from the followingformula:Size required for installation + paging file size + dump file sizeSize required for installation = 5,300MB (Windows Server 2003 R2)Paging file size (recommended) = size of memory mounted* × 1.5Dump file size = size of memory mounted* + 12MBIMPORTANT: The above paging file size is necessary for collecting the debug information (memorydump). If a value smaller than the “Recommended” one is set for the initial size of thepaging file, correct debug information (memory dump) may not be collected. The maximum paging file size is 4095MB in a partition. If 1.5 times the size ofmounted memory is larger than 4095MB, set the size at 4095MB. If the size of mounted memory is larger than 2GB, the maximum size of dump file is“2048MB+12MB.”