NEC Express5800 Configuration Manual

Also see for NEC Express5800 Series: User guide User guide User guide User guide Configuration guide

NEC Express5800 Configuration Manual Manual pdf 57 page image

CONFIGURATION GUIDE – NEC Express5800/T120dNEC Corporation Revision 7.0 – October 25, 2013 57ReferencesServer ManagementThe EXPRESSSCOPE Engine 3, integrated into the server, provides superior remote control and systemmanagement features listed in the table below.Standard With Remote KVMand Media LicensekitHardwaremonitoringTemperature/hard drive/fan/voltage/powerconsumption/degeneration(memory/hard drive1) Hardware configuration information collection  Hardware event log collection  Boot monitoring BIOS/POST stall, Booting, OS stall, shutdown  2  2Alerting HW error, Boot error , and OS panic(by SNMP, E-Mail) Remote KVM(via LAN)POST/BIOS setup, ROM utility  3 Panic screen, Boot screen  3, 4, 5 CUI-based screen (OS console)  3, 5 GUI-based screen (OS console) - Remote control(via LAN)Remote reset/power on-off/ dump  Remote power capping  BIOS/BMC FW update  Remote BIOS setup(partial configuration only)  OS shutdown  2  2Remote media (CD/DVD/FD/USB) - CLP (Command Line Protocol) (DMTF compliant)  Remote control via Web browser (multi user loginat the same time) Scheduling (without UPS)  2  2Maintenance EXPRESSSCOPE® Profile key(Backup/restore BIOS/BMC setup information) Others Set automatic IP address via DNS/DHCP  LDAP/Active Directory verification/user control  Clock synchronization of main unit and the RTC  Access log collection  Industry standard IPMI 2.0 2.01 The feature is not supported on non-hot plug 3.5-inch drive.2 The feature is not supported on VMware ESXi systems.3 The optional serial port is not available for the feature.4 Monitoring boot screens is not supported on VMware systems.5 In VMware systems, only the direct console user interface is supported.