NEC Express5800/R110i-1 System Configuration Manual

Also see for Express5800/R110i-1: Maintenance Guide Getting started

NEC Express5800/R110i-1 System Configuration Manual Manual pdf 15 page image

SYSTEM CONFIGRATION GUIDE – NEC Express5800/R110i-1NEC Corporation Revision 2.0 – June, 2017 154 Internal Hard Disk Drives4.1 RAID ConfigurationRefer to the section in accordance with your disk form factor and RAID configuration.4.1.1 2.5-inch DriveOperating System Supported RAID configuration SupportedHDD/SSDRAID and Cache SectionVMware ESXi 6.0 Non-RAID (Embedded SATA) 4.2.1 4.3.1RAID 0/1/10 No Cache 4.2.3 4.3.3RAID 0/1/10 1GB Cache 4.2.4RAID 5/6/50/60 1GB Cache 4.2.5RAID 5/6/50/60 2GB Cache 4.2.6Windows Server 2012Windows Server 2012 R2Windows Server 2016Non-RAID (Embedded SATA) 4.2.1 4.3.1RAID 0/1 (Embedded SATA RAID) 4.2.2 4.3.2RAID 0/1/10 No Cache 4.2.3 4.3.4RAID 0/1/10 1GB Cache 4.2.4RAID 5/6/50/60 1GB Cache 4.2.5RAID 5/6/50/60 2GB Cache 4.2.6Red Hat Enterprise Linux 7VMware ESXi 6.5Non-RAID (Embedded SATA) 4.2.1 4.3.1RAID 0/1/10 No Cache 4.2.3 4.3.4RAID 0/1/10 1GB Cache 4.2.4RAID 5/6/50/60 1GB Cache 4.2.5RAID 5/6/50/60 2GB Cache 4.2.6NOTE: Up to four drives can be installed when you choose the Embedded SATA non-RAID controller. All drives within a RAID array should be of the same type, capacity and rotation speed. Up to two kinds of drives selected from SAS 10K HDDs (512n), SAS 10K HDDs (512e), SAS 15K HDDs, SATA HDDs SASSSDs, SATA SSD (ME), and SATA SSD (VE) can be mixed. To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in order to minimize the risk ofbecoming multiple hard drives failure during the RAID rebuilding process.Slot 2Slot 3Slot 4Slot 5Slot 6Slot 7Slot 0 Slot 1