NEC Express5800 Series User Manual

Also see for NEC Express5800 Series: User guide User guide User guide User guide Configuration guide

Contents

NEC Express5800 Series User Manual Manual pdf 80 page image

1. Installing Internal Optional DevicesExpress5800/R120e-1E User’s Guide80Chapter 2 Preparations1.12.2 Supported cards and available slotsThe following tables list supported cards and slots available for them. For details of the functions of eachboard, refer to the manual supplied with the card.Tips • Different cards mounted on the same bus operate at the lower frequency.• When the operation performance of a PCI card is higher than the PCI slot onthe server, the PCI card operates with the performance of the PCI slot on theserver.Slot number #1A #1B #1CPCI Standard PCIe 3.0 PCIe 2.0PCI slot performance *1 X8 lane X16 lane X4 laneSocket type *2 X8 sockett X16 socket X8 socketTransfer bandwidth(per lane) *1 8Gb/s 5Gb/sSlot size Low profileAvailable card sizeDedicated toRAID Controller 170mm maxProductnumberProduct nameRemarksN8103-172 RAID Controller(512MB, RAID 0/1)[PCI Express 3.0(x8)]c − −N8103-173 RAID Controller(512MB, RAID 0/1/5/6)[PCI Express 3.0(x8)]c − −N8103-174 RAID Controller(1GB, RAID 0/1/5/6)[PCI Express 3.0(x8)]c − −N8103-168 RAID Controller(1GB, RAID 0/1/5/6)[PCI Express 3.0(x8)]c − −Dedicated to connect withinternal hard disk drive.Additional battery N8103-153can be mounted.Up to two additional batteriescan be mounted.N8103-168 is included flashcache protection modules.N8103-161 RAID Controller(1GB, RAID 0/1/5/6)[PCI EXPRESS 3.0(x8)]− c c Dedicated to connect withexternal devices.N8103-161 incorporates a flashbackup unit as the standardconfiguration.Up to two additional batteriescan be mounted.N8103-142 SAS Controller[PCI Express 2.0(x8)]− c c Dedicated to connect withexternal devices.N8190-153 Fibre Channel Controller(8Gbps/Optical)[PCI Express 2.0(x8)]− c c Dedicated to connect withexternal Fibre Channel devices.N8190-154 Fibre Channel Controller (2ch)(8Gbps/Optical)[PCI Express 2.0(x8)]− c c Dedicated to connect withexternal Fibre Channel devices.N8190-157 Fibre Channel Controller(16Gbps/Optical)[PCI Express 3.0(x8)]− c c Dedicated to connect with externalFibre Channel devices.N8190-158 Fibre Channel Controller(2ch)(16Gbps/Optical)[PCI Express 3.0(x8)]− c c Dedicated to connect with externalFibre Channel devices.z Installed as standard c Can be installed − Cannot be installed*1 Data transfer rate of PCI slot = Transfer bandwidth × Number of lanes x8 lane = 64 Gbps (one-way)*2 Connector size. Cards exceeding the number of sockets cannot be connected. x4 socket can connect with x1 and x4 cards, but not x8 card.* For details of functions of each card, refer to the technical guide.* The card performance described in the parentheses after the Product name indicates the maximum operation performance of thecard.* When the operation performance of a PCI board is higher than the PCI slot on the server, the PCI board operates with theperformance of the PCI slot on the server.