1. Installing Internal Optional DevicesExpress5800/R120h-1E User’s Guide 103Chapter 2 Preparations1.15 M.2 SATA SSD Kit (To be supported)M.2 SATA SSD Kit (Optional) can install the M.2 SATA SSD (Optional, Max 2).Install the M.2 SATA SSD Kit1.15.1Note In order to prevent the damage to electronic components, please start to install thesystem after conducting the appropriate anti-static treatment. There is a possibilityof causing electrostatic discharge if appropriate grounding wire treatment is notconducted.Please prepare the following before installing the options. Parts included in the option kit Phillips screwdriverTo install the components, follow these steps.1. Back up all data in the server.2. See steps 1 to 7 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.3. See Chapter 2 (1.9 Riser Card) to remove the riser card in the loaded location4. See Chapter 2 (10 PCI board) to install M.2 SATA SSD Kit in the loaded location.5. Attach M.2 SSD to the M.2 SSD assembly board that is in the M.2 SATA SSD kit.Insert the M.2 SSD (with the M.2 SSD assembly board) to the connector at 45degree then recline it towardto the board. Fix the M.2 SSD to the board with one screw. Repeat the same process for 2nd M.2 SSD.6. Install SATA cable in the M.2 SATA SSD Kit7. See Chapter 2 (1.9 Riser Card) to install the riser card attaching M.2 SATA SSD Kit
