NEC Express5800 System Configuration Manual

Also see for NEC Express5800 Series: User guide User guide User guide User guide Configuration guide

NEC Express5800 System Configuration Manual Manual pdf 27 page image

SYSTEM CONFIGURATION GUIDE – NEC Express5800/R120h-2MNEC Corporation Revision 5.0 – January 2018 272x2.5-inch Hot Plug Drive Cage Kit(SAS/SATA, Rear)Riser card for slot 3 or 6 with one PCIe 3.0 x16 slot,including 2x 2.5-inch drive bay to install into slot 1 to 2 or4 to 5N8154-98NOTE: To use PCI slot 4 to 6, dual-processor configuration is required. If the N8154-98 2x2.5-inch Hot Plug Drive Cage Kit (SAS/SATA, Rear) is installed on 2nd Riser, it is not allowed to install 3rd Riser.Refer to 4.1.4Optional Rear Drive Bay” in detail.3rd PCI Riser Card KitProduct Name / Description Figure Part Number3rd Riser Card Kit(1xPCI, 1xGPU Installation Kit)Riser card for slot 7 with one PCIe 3.0 x16, onepower connector for GPU, and support bracket for adual-slot PCI cardN8116-783rd Riser Card Kit(2xPCI)Riser card for slot 7 to 8 with two PCIe 3.0 x8 slotsN8116-81NOTE: Dual-processor configuration is required. 2nd PCI Riser Card Kit (N8116-62/-67/-56) is required to install 3rd Riser Card Kit. If you order two N8154-95 2x2.5-inch Hot Plug Drive Cage Kit (SAS/SATA/PCIe SSD), N8154-117 Internal DVD Drive InstallationKit is required. If one N8154-95 2x2.5-inch Hot Plug Drive Cage Kit is selected with N8154-117 Internal DVD Drive Installation Kit,the Drive Cage is preferentially installed in N8154-117 Internal DVD Drive Installation Kit mounted on Drive Cage 1 (Option). If oneN8154-95 2x2.5-inch Hot Plug Drive Cage Kit is selected without N8154-117 Internal DVD Drive Installation Kit, the Drive Cage canbe installed in Rear Drive Cage6 instead of 3rd PCI Riser Kit. The 3rd PCI Riser Card Kit is not available if the N8154-95 2x 2.5-inch Drive Cage Kit is installed into slot 7 to 8. If N8154-98 2x2.5-inch Hot Plug Drive Cage Kit (SAS/SATA, Rear) are selected in 2nd Riser, 3rd Riser Card can’t be added toRiser Card.Network Interface ControllerCategory Product Name / Description Part NumberLOM Card 1GbE Quad Port 1000BASE-T LOM CardBroadcom BCM5719PCIe 2.0(x4)N8104-171Quad Port 1000BASE-T LOM CardIntel Ethernet Controller I350PCIe 2.0(x4)N8104-17210GbE Dual Port 10GBASE-T LOM CardQLogic 57810SPCIe 2.0(x8)N8104-173Dual Port 10GBASE-T LOM CardIntel X550PCIe 3.0(x4)N8104-175Dual Port 10GBASE SFP+ LOM CardIntel Ethernet Controller X710PCIe 3.0(x8)NOTE:- N8104-189 SFP+ Module is required to connect with an optical cable.- Up to two SFP+ Modules can be installed.N8104-176