NEC Express5800/T110f-SEXP285A User Manual

Also see for EXP285A: Maintenance Guide Maintenance Guide User guide User guide

Contents

NEC Express5800/T110f-SEXP285A User Manual Manual pdf 65 page image

1. Installing Internal Optional DevicesExpress5800/T110f-S User’s Guide 65Chapter 2 Preparations2. Install the RAID Controller into the PCI slot #4 and fix it in place. Be careful not to disconnect thebattery control cable.3. Connect the cables and components that you removed earlier.1.10.3 RemovalTo remove the extra battery for the RAID Controller, reverse the installation procedure.1.10.4 Installing the flash backup unit that comes with N8103-167Install the flash backup unit that comes with N8103-167 RAID Controller the by using the following procedure.Note Read through the user’s guide supplied with the RAID Controller before installation.Connecting the flash backup unit control cableReferring to the image below, connect the flash backup unit control cable into the battery pack. Checkthe orientation of the connector and connect the cable straight into the connector.RAID Controller