NEC Express5800/T110h Configuration Manual

SYSTEM CONFIGRATION GUIDE – NEC Express5800/T110hNEC Corporation Revision 5.0 – January, 2017 34Server ManagementThe EXPRESSSCOPE Engine 3, integrated into the server, provides superior remote control and system managementfeatures listed in the table below.Standard With Remote KVMand Media LicensekitHardwaremonitoringTemperature/hard drive1/fan/voltage/powerconsumption/ System LAN/degeneration/ (memory/harddrive1) Hardware configuration information collection  Hardware event log collection  Boot monitoring BIOS/POST stall, Booting, OS stall, shutdown  3  3Alerting HW error, Boot error and OS panic(by SNMP, E-Mail) Remote KVM(via LAN)POST/BIOS setup, ROM utility  2 Panic screen, Boot screen  2,4,5 CUI-based screen (OS console)  2,5 GUI-based screen (OS console) - Remote Screen Video Capture - Remote control (viaLAN)Remote reset/power on-off/ dump  Remote Power Capping  BIOS/BMC FW update  Remote BIOS setup(partial configuration only)  OS shutdown  3  3Remote media (CD/DVD/FD/USB) - CLP (Command Line Protocol) (DMTF compliant)  Remote control via Web browser (multi user login at thesame time) Scheduling (without UPS, require NEC ESMPROManager) 3  3BIOS setting by using XML file  Maintenance EXPRESSSCOPE® Profile key(Backup/restore BIOS/BMC setup information) Others Set automatic IP address via DNS/DHCP  LDAP/Active Directory verification/user control  Clock synchronization of main unit and the RTC  Access log collection  Industry Standard IPMI support 2.0 2.01 The feature is not supported on non-hot plug 3.5-inch drive.2 The optional serial port is not available for the feature.3 The feature is not supported on VMware systems.4 Monitoring boot screens is not supported on VMware systems.5 In VMware systems, only the direct console user interface is supported.