4. Names and Functions of PartsExpress5800/T120d User’s Guide30Chapter 1 General Description4. Names and Functions of PartsThis section describes the names of the server parts.4.1 Front View2 1(1) Front BezelThe cover to protect the front of the server. This cover canbe locked with the provided Bezel Lock Key.(2) Key SlotThe slot for Bezel Lock Key that is used to lock Front Bezel.(3) StabilizersOpen stabilizers to fix the server to installation site.(4) LINK/ACT LED (green)This LED turns on when the server is connected to thenetwork.The LED of (4)-1 means LAN1 and (4)-2 means LAN2.(5) DISK Access LED (green/amber)This LED lights green when the internal HDD or ODD arebeing accessed.An amber light turns on if a HDD is broken, and a lightflashes green and amber alternately when a HDD is beingrebuilt. (RAID System only)(6) STATUS LED (green/amber)This LED indicates the server status. It lights green whenthe server is operating normally. This LED flashes greenwhen a degeneration is detected in redundant hardwareconfiguration. If a failure is detected, it turns on or flashesamber.(7) POWER LED (green)This LED lights green when the power is ON. This LEDlights amber when power cord is connected to power outletuntil the system becomes ready to power-on.(8) POWER SwitchThe switch to turn the server on and off. Press once to turnon the server. POWER LED lights when it is on. Press itagain to turn off the server. Hold down the switch for 4seconds or more to forcibly turn off the server.(2)(3)(4)-2 (4)-1(5) (8)(7)(6)(1)
