2. GlossaryExpress5800/T120h User’s Guide 207Chapter 4 Appendix2. GlossaryTerm DescriptionAHS Active Health System (AHS) monitors the status/configuration of theserver, and records it to a log file if any changes occur. AHS log is usedfor maintenance to investigate the failure.AMP Advanced Memory Protection (AMP) is a technology for realizing a faulttolerance of the server by memory redundancy (such as mirroring).AMS Agentless Management Service (AMS) is an OS service for sendinginformation (such as OS events) that iLO cannot collect directly. iLOrecords the information received by AMS, and send it to AgentlessManagement.EXPRESSBUILDER Software for setting up the server. EXPRESSBUILDER can be startedby pressing key during POST.Express Report Service Software that can report the server failure to the contact center byE-mail or modem. This software is installed with NEC ESMPROServerAgentService to the server.Express Report Service (HTTPS) Software that can report the server failure to the contact center byHTTPS. This software is installed with NEC ESMPROServerAgentService to the server.Hexalobular A type of screw head characterized by a 6-point star-shaped pattern.This is often called as "Torx" (the Torx is a third party’s trademark).Head sizes are described from T1 to T100. This is sometimesabbreviated as 6lobe.iLO A built-in controller that supports the IPMI version 2.0 protocol. Thecontroller is called as iLO5 because this server adopts a generation 5version controller.NEC ESMPRO ServerAgentService Software for monitoring the server. This works with NEC ESMPROManager. You can choose Service Mode or Non-Service Mode wheninstalling this software. Service Mode resides as the OS service andNon-Service Mode does not use the OS service to reduce memory,CPU power, and other OS resources.NEC ESMPRO Manager Software for managing a number of servers on network.PC for Management A computer for managing the server on network. A generalWindows/Linux computer can be used as "PC for Management".Product Info Collection Utility Software for collecting several hardware/software statuses and eventlogs. You can easily collect the data for the server maintenance byusing this software.RAID Report Service This service monitors the RAID status and notifies failures.RBSU ROM-Based Setup Utility (RBSU) is a built-in utility that can configureconnected devices and BIOS settings. RBSU is called from SystemUtilities.RESTful Interface Tool A tool that supports API based on Representational State Transfer(REST) architecture. You can send maintenance commands in JSONformat to iLO by HTTP protocol after installing this tool.SPP Standard Program Package (SPP) is a software package that includesBIOS, FW, driver, and other basic software. SPP is included in StarterPack.
