NEC FS-5170 Instruction Manual

Contents

NEC FS-5170 Instruction Manual Manual pdf 12 page image

10LOCAL CONTROL KEY MODEYou can call up the MENU without the remote control unit.You can enter the MENU directly by pressing the MENU button.If you press the MENU button over 1 sec, the MENU will be dis-played on the screen. : If you press the MENU button less than 1sec, the screen will convert to AV mode.Move the cursor to the SUB MENU you want by using the PRUP/DOWN buttons and press the VOL B button, then the SUBMENU will be displayed on the screen. When the SUB MENU isdisplayed on the screen you can set it by using the PR UP/DOWNor the VOL UP/DOWN buttons. Press the MENU button to returnto the previous Menu.At the EDIT mode, you can’t use the MOVE function and DELETEfunction.NOTEThe back external terminal and the frontexternal terminal are common. If you useone of them, disconnect the other with theexternal equipment.OSD HALF-TONE FUNCTIONIf you press the RECALL key with the MENU displayed in the screen,the OSD except text will be Half-Toned. If you want to return to the nor-mal OSD, press the RECALL key again.MODEPressing the MODE button on the remote control unit, the currentatcive system of the set will be displayed on the screen.Whenever you press the MODE button, the system will be changedasfollows :AUTO PAL SECAM *N4.43 *N3.58(NTSC 4.43) (NTSC 3.58)From time to time an, abnormal system(NTSC 4.43 or PAL 60Hz) cannot be operated in Auto mode.*In case of Models for Australia, these functions are not available.But, OSD is displayed.