Messaging111Emergency messagesEmergency messages require receipt confirmation - see “Confirmingreceipts” (page 112). An activated dialpad lock temporarily deactivatesafter you receive an emergency message so you can acknowledge thereceipt. The handset shows emergency messages immediately on thedisplay.Unless you disable the ringer, a melody plays when you receive anemergency message. The ringer volume increases to the maximumduring the signalling process. If you receive an emergency messageduring a call, a repeated and in volume increasing alert tone sounds.Note: It is not possible to send emergency message.Configuring the display normal messages optionUse this option to control whether or not normal messages are displayedimmediatelu upon receipt: On to show the normal message, and Off fornot showing the normal message.To configure the display normal message option, perform the followingsteps:1. Open the Message Settings menu as shown in“Accessing the Message settings menu”(page 108).2. Press the Up or Down key to highlight the Displayoption.3. Press the Select soft key and press the Up orDown key to choose the required option.4. Press the Select soft key.DisplaySelectSelect
