NEC IPS-4000 User Manual
                                                                         | |
Contents
| 
Press the MENU button while holding down the CTL button to display the on-screen menu of system settings.Press the or CURSOR button and select SYSTEM A or SYSTEM B.SYSTEM A ItemsSOUND ATT ........... Sound output level adjustment.TBC ......................... Turning on or off time base corrector.Y/C DELAY ............. Y/C signal delay adjustment.MATRIX .................. Setting of the component input signal.VIDEO FORMAT ..... Selection of the input signal system.SYSTEM B ItemsDISPLAY ................. Switches the on-screen display on and off.LCD LIGHT ............. Switches the LCD backlight of the main unit on and off.AUTO POWER ....... This setting automatically starts up the unit when the mainpower is switched on.IR RMT-CTL ............ This setting determines whether or not the signal from theremote control is received.SYNC ...................... This sets the output polarity of the sync signal.Desired items are selected with the and buttons of the cursor.Cr/CbR-Y / B-Y Pr / PbAUTO NTSC4.43NTSC PALSECAMON OFF00- 2 - 1 0 +1+2SOUND ATTTBCY / C DELAYMATRIXVIDEO FORMATSYSTEM A12341234123412341234CURSORCTL ENTER ENDMENUON OFF00- 2 - 1 0 +1+2Cr/CbR-Y / B-Y Pr / PbAUTO NTSC4.43NTSC PALSECAMSOUND ATTTBCY / C DELAYMATRIXVIDEO FORMATSYSTEM AON OFFON OFFON OFFON OFFH - V - H - V+H+ V- H+V+DISPLAYLCD LIGHTAUTO POWERIR RMT-CTLSYNCSYSTEM B[DBL]SYSTEM SETTINGSHow to Bring Up the On-screen Display andSelect Items(Factory Default Settings)The currently set scanning system is displayed.1.2.3.(Factory Default Settings)24 |
manualsdatabase
Your AI-powered manual search engine