NEC ITL-12D-1 - DT730 - 12 Button Display IP Phone Quick Start User Manual

Also see for DTL-8LD-1: User guide User guide

NEC ITL-12D-1 - DT730 - 12 Button Display IP Phone Quick Start User Manual Manual pdf 45 page image

37Using Soft KeyPress FDB Soft Key. Receive special dial tone.Dial destination; wait for service set tone.“FORWARD SET” is displayed; Call Forwarding –Busy Line is set.To Verify (Only For Terminal With LCD)Press FWD-BY.Display indicates the station number calls are for-warded to.To CancelPress key. Receive dial tone. If cancelingfor another station, press MULTILINE APPEAR-ANCE.Press FWD-BY or dial “Call Forwarding – BusyLine” cancel code. Receive service set tone. LEDgoes out at your station (or the DT Series of themultiline station).Press key. Call Forwarding – Busy Line iscancelled.Using Soft KeyPress FDB Soft Key.Receive service set tone and “FORWARD CAN-CEL” is displayed.CALL FORWARDING - DON’T ANSWERTo SetPress key. Receive dial tone.If setting for another station, press MULTILINEAPPEARANCE.Press FWD-NA or dial “Call Forwarding – Don’tAnswer” access code. Receive special dial tone.Dial destination station or external telephone num-ber. Receive service set tone.FWD-NA LED lights (at your station or at the DTSeries of the multiline station you are setting).Press key. Call Forwarding – Don’t Answeris set.Note: With Soft Key operation, FDB flashes on the dis-play.FORWARD SETMIC >>>1:25 PM TUE 18 MAR 2008Forwarding stationFORWARD 20001:25 PM TUE 18 MAR 2008SpeakerSpeakerFORWARD CANCEL1:25 PM TUE 18 MAR 2008FORWARD CANCELMIC >>>1:25 PM TUE 18 MAR 2008DT730/710 DT330/310SpeakerSpeaker