15 ... EnglishInstallationPowering Off the Projector1. Press the “POWER” button on the remote control or thebutton on the control panel to turn off the projector, you willsee a message as below on the on-screen display.2. Press the “POWER” button again to confirm. When the lightturns red, the projector has entered standby mode.3. Disconnect the power cord from the electrical outlet and theprojector.4. Do not turn on the projector immediately following a poweroff procedure.After UseWhen storing the projector in the supplied soft case, insertthe projector with the top cabinet facing upward.The remote control can be stored in the inner pocket insidethe soft case.Lens coverIn some cases thePOWER indicator canstay light for a certainperiod oftime after the powercord is unplugged.This is not a fault. Pressthe POWER buttonagain with the powercord unplugged andthe indicator light willgo off.
