NEC LT157 User Manual

Also see for LT157 - XGA LCD Projector: Specifications Installation data Quick connect guide

Contents

NEC LT157 User Manual Manual pdf 19 page image

E – 15Switching operation mode between computer and projectorThe three shaded buttons shown on the drawing work as a computer mouse in the Computer mode.In the Computer mode the PJ button is not lit.• When the MENU button is pressed, the PJ button lights red to indicate that you are in the Projector mode, which allows the projector menuoperation using the three buttons.• When the POINTER button is pressed, the PJ button lights red to indicate that you are in the Projector mode and that the SELECT , , , button works as a moving button for the POINTER or magnified image.• If no buttons are pressed within 10 seconds, the PJ button's light goes out to indicate that you are in the Computer mode. To enable the projectormenu operation again, press the PJ button to light red. To move the pointer or a magnified image again, turn off the pointer and then turn on thepointer (press the POINTER button two times).• When the PJ button is lit, if you want to use the mouse function immediately, press the PJ button to return to the Computer mode (not lit).Works as the Selectbutton on the projector.MENUENTERCANCELPJFOCUS ZOOMOFFVIDEOAUTO ADJ.S-VIDEO RGB1 RGB2LASERONVOLUMESHIFTHELP POINTERKEYSTONE MAGNIFYFREEZEPIC-MUTEPC CARDSLIDEFOLDERSLIDELISTSELECTPOWERMENUE N TERCANCELFOCUS ZOOMOFFVIDEOAUTO ADJ.S-VIDEO RGB1 RGB2LASERONVOLUMESHIFTHELP POINTERKEYSTONE MAGNIFYFREEZEPIC-MUTEPC CARDSLIDEFOLDERSLIDELISTSELECTPOWERPJNot litWorks as a mouse for yourcomputer.Works as a right-click buttonfor your computer.Works as a left-click button foryour computer.Lit redWorks as the Enterbutton on the projector.Works as the Cancelbutton on the projector.During Computer mode:During Computer mode by pressing the ENTER button for 1.5 sec-onds or more then releasing, the drag mode is set and the drag opera-tion can be performed simply by pressing the SELECT (, , , )(mouse) button. To cancel the drag mode, press the ENTER (left click)button again or press the CANCEL (right click) button.