E-126TROUBLESHOOTINGThis section helps you resolve problems you may encounter while setting up orusing the projector.Power IndicatorIndicator Condition Projector Condition NoteOffBlinking lightSteady lightGreen blinkingGreen blinkingOrange blinking0.5 sec ON,0.5 sec OFF2.5 sec ON,0.5 sec OFF0.5 sec ON,0.5 sec OFFThe main power is offThe projector is getting readyto turn on.The projector is in Sleep mode.The projector is cooling down.The projector is turned on.The projector is in Standby orIdle.GreenOrange–Wait for a moment.–Wait for a moment.––Indicator Condition Projector Condition NoteOffBlinking lightSteady lightRed blinkingGreen blinkingOrangeGreen1 cycle (0.5 sec ON,2.5 sec OFF)2 cycle (0.5 sec ON,0.5 sec OFF)3 cycle (0.5 sec ON,0.5 sec OFF)4 cycle (0.5 sec ON,0.5 sec OFF)6 cycle (0.5 sec ON,0.5 sec OFF)NormalLamp cover errorTemperature errorPower errorFan errorLamp errorRe-firing the lampControl key lockedIdle condition–Replace the lampcover correctly.The projector isoverheated. Movethe projector to acooler location.Power unit will notwork correctly.Fans will not workcorrectly.Lamp fails to light.Wait a full minute andthen turn on again.The projector is re-firing.You have pressedcontrol panel keywhen Control KeyLock is enabled.–Status Indicator
