NEC M166C Customer Engineer Manual

NEC M166C Customer Engineer Manual Manual pdf 20 page image

Setting up a Template© NEC Nederland B.V. 2015 Page 20 M166 CE Manual Send Power off notificationsSelf-explaining. Send in/out charger notificationsSelf explaining. Low power sound indication.Self-explaining. In/out charger sound indicationSelf explaining. Location Notification (RFID) (Only applicable for M166CL with DLA)Here you can activate notification when the M166 detects an RFID beacon. Thereare three options: Off In-range Notifications.When the handset detects a beacon signal, it will give a notification. In and out-of-range notifications.When the handset detects a beacon signal or detects that it loses signal from abeacon, it will give a notification.Note: When Location Notification is enabled and an Alarm is activated from the M166,the M166 will send an alarm message AND a beacon notification. Notification numberThe destination number used in the RFID notification. Please note that this numberis only used as notification destination for RFID, and not for other notifications.2.5 Save the TemplatePlease note that it is not possible to read out the configuration from the M166. Therefore,please store the Template that you have created for later use. This may be required incase you must replace an M166 or if you want to make changes in the configuration.Save the Template by means of:File” “Save as”. The File extension will be .166.