Microsoft Windows CE Services 4-7Creating a Dial-up Connection to a Modem Attached to yourHost PC.Note: If you are a Windows 95 user, installthe Dial-Up Networking Upgrade 1.2 and createa user account if User Level Access is enabled inDial-Up Networking. If you are a Windows 98user, add a second dial-up adapter. For moreinformation, see Windows CE Services Help.1. Follow the modem manufacturer's directions to install amodem on your host PC.2. Note the telephone number for your host PC modem.3. On your host PC, open the Mobile Device folder. ClickFile and then Communications.4. Under Device Connections via Serial Port, click yourmodem in the Ports list.5. Click Enable mobile device connection.6. Click Enabled in both Device Connections via Serial Portand Device Connections via Network.7. Create a dial-up connection as described, “Setting Up aRemote Connection,” in Chapter 3.Getting Help on Windows CE ServicesFor additional setup, usage, and troubleshooting information,see online Help on the host PC by choosing Windows CEServices Help Topics on the Help menu in the MobileDevices folder.