NEC MT 1020 User Manual
                                            | |
Contents
| 
Connecting Your Document CameraYou can connect your MultiSync MT1020/MT820 LCD Projector to a document camera. To do so, simply:1. Turn off the power to your LCD projector and document camera.2. Use a standard video cable to connect your document camera to the Video input on your projector.3. Turn on the LCD projector and the document camera.NOTE: Refer to your document camera's owner's manual for more information about your camera's videooutput requirements .Connecting Your VCR Or Laser Disc PlayerUse common RCA cables (not provided) to connect your VCR or laser disc player to your MultiSyncMT1020/MT820 LCD Projector. To make these connections, simply:1. Turn off the power to your LCD projector and VCR or laser disc player.2. Connect one end of your RCA cable to the video output connector on the back of your VCR or laser discplayer, connect the other end to the Video input on your projector. Use standard RCA audio patch cordsto connect the audio from your VCR or laser disc player to your projector (if your VCR or laser discplayer has this capability). Be careful to keep your right and left channel connections correct for stereosound.3. Turn on the LCD projector and the VCR or laser disc player.NOTE: Refer to your VCR or laser disc player owner's manual for more information about your equipment'svideo output requirements.Connecting An External MonitorYou can connect a separate, external monitor to your LCD projector to simultaneously view on a monitorthe image you're projecting. To do so:1. Turn off the power to your LCD projector and computer, document camera or video source.2. Use a 15-pin cable to connect your monitor to the RGB MONITOR OUT connector on your LCDprojector.3. Turn on the LCD projector and the computer, document camera or video source.INSTALLATION4142 |
Related manuals for NEC 8201020
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine