NEC MT 1020G /820G User Manual

NEC MT 1020G /820G User Manual Manual pdf 13 page image

E – 13This section describes how to set up your MultiSyncMT1020G/820G LCD projector and how to connect videoand audio sources.Setting Up Your MultiSyncMT1020G/820G LCD ProjectorYour MultiSync MT1020G/820G LCD Projector is simpleto set up and use. But before you get started, you must first:1. Determine the image size2. Set up a screen or select a non-glossy white wall ontowhich you can project your image.Carrying The LCD Projector Always carry your LCDprojector by the handle. Ensure that the power cord andany other cables connecting to video sources are discon-nected before moving the projector. When moving theprojector or when it is not in use, cover the lens with thelens cap.Selecting A Location The further your LCD projector isfrom the screen or wall, the larger the image. The mini-mum size the image can be is approximately 20" (0.5 m)measured diagonally when the projector is roughly 1.0 m(3 feet) from the wall or screen. The largest the image canbe is 300" (7.6 m) when the projector is about 12.2 m(40.03 feet) from the wall or screen.Using the Supplied Lift KitWhen you need to set the projector at 10.5° projection angleor more, assemble and use the lift kit.1. Assemble the kit.I N S T A L L A T I O N2• Align the foot and mate with corresponding grooves in thebar.2. Place the projector on the lift kit.3503002502001501005000.0 6.56 13.12 19.69 26.25 32.81 40.03 ft.(2.0) (4.0) (6.0) (8.0) (10.0) (12.2) (m)Projection DistanceDiagonal Image Size (inch)Projection Distance and Image Size300”235”WIDETELE27”20”WidthHeight Screen size(diagonal)Projection distanceCarrying handlePush to release thehandle.Pull outPush to retract