30Memory Editor SetupThis section provides the information of:• How do I identify the COM port number to use with Memory Editor?• How do I setup the COM port to use with Memory Editor?NOTE: If you use the same USB port each time when you insert the USB cable to yourcomputer, the COM port setup is completed only one time.If you switch to another USB port, the NEC USB Drivers must be installed forthe new USB port and the COM port setup must be completed again. Therefore,it is recommended that you insert the USB cable into the same USB port eachtime when you use Memory Editor.Identify COM Port NumberFirst, you must determine the COM port that the NEC Portable Phone USB Modem isassigned.You may access the Device Manager window through System in the Control Panel, butusing the instructions provided requires fewer steps to find the necessary COMinformation.1. Go to Start and Control Panel.2. Select Modems. The Modem Properties window displays.
