NEC MultiSync 77F User Manual

Contents

NEC MultiSync 77F User Manual Manual pdf 5 page image

Quick StartFigure A.13To attach the MultiSync® monitor to your system, follow theseinstructions:1. Turn off the power to your computer.2. If necessary, install the display card into your system. For more information,refer to the display card manual.3. For the PC: Connect the 15-pin mini D-SUB of the captive signal cable to theconnector of the display card in your system (Figure A.1). Tighten all screws.For the Mac: Connect the Macintosh cable adapter (not included) to themonitor connector on the Macintosh (Figure B.1). Attach the 15-pin miniD-SUB end of the captive signal cable to the Macintosh cable adapter onthe computer (Figure B.1). Tighten all screws.NOTE: To obtain the Macintosh cable adapter, call NEC-Mitsubishi ElectronicsDisplay of America, Inc. at (800) 632-4662.4. Connect one end of the power cord to the MultiSync monitor and the otherend to the power outlet (Figure C.1).5. Turn on the monitor (Figure D.1) and the computer.NOTE: For download information on the Windows® 95/98/2000/XP INF filefor your MultiSync monitor, refer to the References section of this User’sManual.NOTE: If you have any problems, please refer to the Troubleshooting section ofthis User’s Manual.Captive Signal Cable15-pin mini D-SUBMS77F97F112701.p65 11/27/01, 3:15 PM5