NEC MultiSync E1100 User Manual

Contents

NEC MultiSync E1100 User Manual Manual pdf 19 page image

Geometry ControlsThe Geometry controls allow you to adjust the curvature or angle of thesides of your display.IN/OUT (pincushion): increases or decreases the curvature of the sideseither inward or outward.LEFT/RIGHT (pincushion balance): increases or decreases thecurvature of the sides either to the left or right.TILT (parallelogram): increases or decreases the tilt of the sides eitherto the left or right.ALIGN (trapezoidal): increases or decreases the bottom of the screento be the same as the top.ROTATE (raster rotation): rotates the entire display clockwise orcounter clockwise.Note on Controls in the Geometry Controls Menu:EXIT: exits to the main menu.Cursor t/s: moves the highlighted area up/down to select one of thechoices.Cursor +/-: moves the bar in the + or – direction to increase or decreasethe adjustment.RESET: resets the current highlighted control to the factory setting.Tools 1Provides a list of optional adjustments which include the following:LANGUAGE: OSM menus are available in 6 languages.OSM POSITION: You can choose where you would like the OSMimage to appear on your screen. Selecting OSM location allows you tomanually adjust the OSM menu left, right, up, or down.OSM TURN OFF: The OSM menu will stay on as long as it is in use.In the OSM Turn Off sub-menu, you can select how long the monitorwaits after the last touch of a button to shut off the OSM menu. Thepreset choices are 10, 20, 30, 60, 120 seconds.OSM LOCKOUT: This control completely locks out access to allOSM functions. When attempting to activate OSM while in the lockoutE - 14 OSM Menus