NEC MultiSync E1100+ User Manual

NEC MultiSync E1100+ User Manual Manual pdf 12 page image

Specifications10Monitor MultiSync ® E1100 +™ NotesSpecifications MonitorPicture Tube Diagonal: 53 cm/21 inch 90° deflection, 0.24 mm horizontal pitch,Viewable Image Size: 50.2 cm/19.8 inch (0.28 mm diagonal trio dot pitch)Radius: 1730 mm medium short persistence phosphor,multi-layered, anti-static screen coating,semi-tint screen, Invar Shadow Mask andOptiClear® screen surface.Input Signal Video: ANALOG 0.7 Vp-p/75 OhmsSync: Separate sync. TTL LevelHorizontal sync. Positive/NegativeVertical sync. Positive/NegativeComposite sync. (Positive/Negative) (TTL Level)Display Colors Analog input: Unlimited number of Colors Depends on display card used.Synchronization Horizontal: 31 kHz to 96 kHz AutomaticallyRange Vertical: 55 Hz to 160 Hz AutomaticallyResolutions Supported 640 x 480 @ 60 to 160 Hz Some systems may not supportResolution based on horizontal and 800 x 600 @ 55 to 152 Hz all modes listed.vertical frequencies only 832 x 624 @ 55 to 144 Hz1024 x 768 @ 55 to 119 Hz1152 x 870 @ 55 to 105 Hz1280 x 1024 @ 55 to 89 Hz ..................... NEC cites recommended resolution at1600 x 1200 @ 55 to 77 Hz 85 Hz for optimal display performanceActive Display Area Horizontal: 390 mm/15.4 inches Dependent upon signal timing used,(Factory Setting) Vertical: 293 mm/11.5 inches and does not include border area.Active Display Area 402 mm/15.8 inches Dependent upon signal timing used,(Full Scan) 301 mm/11.9 inches and does not include border area.Power Supply AC 100 – 120 V/220 - 240 V@, 50/60 HzCurrent Rating 2.1A @ 100 – 120 V/1.4A@ 220-240 VDimensions 509 mm (W) x 519 mm (H) x 525 mm (D)20.0 inches (W) x 20.4 inches (H) x 20.7 inches (D)Weight 31.0 kg68.3 lbsEnvironmental ConsiderationsOperating Temperature: 0°C to +35°CHumidity: 30% to 80%Feet: 0 to 10,000 FeetStorage Temperature: -20°C to +60°CHumidity: 10% to 90%Feet: 0 to 45,000 FeetNOTE: Technical specifications are subject to change without notice.78133724.wpc 11/18/98, 11:52 AM12